FRP pultrusion profiles are reinforced plastic products which are high tensity but light weight, anti-corrosive, electric& heat insulated, flame retardant, low temperature resistance, easy maintenance & to design, good appearance.
| Name | Type | Unit wt(g/m) |
|---|---|---|
| Tubes | Ø6.0(Ø2.0) | 48.1 |
| Ø8.0(Ø4.0) | 81.9 | |
| Ø10.0(Ø6.0) | 93.1 | |
| Ø12.0(Ø8.0) | 114.6 | |
| Ø20.0(Ø16.0) | 221.0 | |
| Rods | Ø5.0 | 38.2 |
| Ø10.0 | 152.2 | |
| Ø20.0 | 591.0 | |
| Angle iron | 30x30x5 | 506 |
| 40x40x5 | 704.2 | |
| 100x100x5 | 2211.8 | |
| Square Tubes | 38x38x4 | 995.4 |
| 50x50x4 | 1450.1 | |
| 75x75x6 | 3125.2 | |
| I-Beams | 76x76 x 6.4x6.4 | 2.52 Kgs |
| 102 x 102 x 6.4 x 6.4 | 3.31 Kgs | |
| 152 x 152 x 6.4 x 6.4 | 7.64 Kgs | |
The above specifications are only for reference and represents only a fraction of our complete pultruded range .
PULTRUDED FRP MOULDS
Grating FRP
Moulded pultrusion profiles can be manifactured to suit any application.
Dies are Machined into profiles such as I-Beams, C-Section Channel, Hollow Tube, Square Tube and FRP Angles.
Each profile can be formed using any type of resin listed in our resin selection chart.
